Press Send to run a command (output appears in the terminal below). Commands with lowercase placeholders (h = hex digit, hh = hex byte, d = digit) get an Edit button that copies them into the terminal. The dashboard expects echo, headers and spaces off and responses on, so after using ATE1, ATH1, ATS1 or ATR0 send ATE0, ATH0, ATS0 or ATR1 to restore them.
Activation tests drive real components (pumps, valves, fans, injectors). Only test with the vehicle stationary, parking brake on, and nobody near moving parts. Standard Mode 08 tests are rarely supported; ECU control commands are manufacturer-specific and wrong values can damage parts or upset the ECU. Use at your own risk.
The number is the auto-return delay in seconds (0 = manual). Setting a target pauses live polling until you restore functional addressing.
For older VW/Audi/Seat/Skoda control units that talk KW1281 over K-line (pin 7). Needs a USB serial KKL cable (e.g. FTDI-based VAG-COM 409.1) and desktop Chrome/Edge. The 5-baud wake-up is sent by toggling the serial break signal, so cables whose driver ignores break will not work. This tab opens the cable itself: disconnect the main connection first.
Known formulas are decoded (rpm, °C, V, km/h, ms); anything else is shown as raw formula, A and B bytes.